Agile charge slots not actioned

johalareewi

I set up a sequence of charge / export slots last night to cover this morning.
When I got up I swapped some export slots to charge but they haven't been actioned.

09:30-10:00 was an export which I changed to charge and I also added extra charge slots afterwards.
Nothing has been actioned since 09:30

Activity log

neighboring-volume

admin

johalareewi Looks like an end discharge ran at around 9:00 - which trumped the charge - we'll do some digging.

Workaround for now is to start your contiguous charge block from 11:30, so clear out the 11:00-11:30 slot.

admin

johalareewi Sorry - since 9:30 was the issue....checking - so yeah this is after we have already sent the charge instruction to the inverter for the current period.

We need to detect this change and it needs to then extend the charge instruction by updating the inverter charge time to. We will look into this.

johalareewi

Too late to clear 11:00-11:30. Next non-grey slot is 12:00-12:30.

admin

johalareewi Yeah, depending on when you saw this, sorry!

MikeC

male-relative
I had an agile export set up last night from midnight to 2.00am. According to the activity log it was actioned but it didn't work.
All other slots have worked fine both last night and this morning; we had a problem around midnight previously so wondering if it isn't fully sorted?

johalareewi

I cleared the 12:00-12:30 slot and the scheduler kicked back in at 12:30.

MikeC

male-relative
Something not right with midnight slots.
I had agile export slots set up last night bridging midnight, the activity log shows the instruction being sent for the post midnight slots but exporting stopped at midnight. The charge slots I had set up later all worked fine, it's just any instruction over the midnight period isn't working

admin

MikeC Looks like an end discharge instruction was sent afterwards. We'll get a fix out.