OK sent a private about this. I tried exporting for 20 minutes but the export did not start. The Eco switch in my inverter settings remained in the on position

    Gazzagreen Yeah, looks like you set export SOC requirement for export/discharge slot to be 90% but:

    It should say this in your WW activity log too.

    I did another export test a short while ago. While the export started and stopped as per the settings, Eco was not re enabled and I was importing from grid to home.

      KevinD Can you send us the Giv logs please so we can look into this?

        KevinD So it looks like it scheduled it correctly.

        Can you toggle these buttons off at the bottom and grab the logs again pls?

        KevinD Found an issue our end re-enabling eco after export when you have individual days selected.

          I want to try it then and hit the "Stop export at" value, I'll try it tonight when we're passed the peak period.

          admin
          That's a relief, I thought it was probably me being fat fingered again. 👍

          OK - fair few bits rolled out now in 351 release. Thanks again for all the testing, your help is appreciated.

          Back again :D
          Everything worked swimmingly last night to get some cheap electric except for the 00:00 - 00:30 slot which did not activate for some reason.

            Jeff There may be is a bug on the midnight overlap, where the previous 30 min end instruction gets written after your 00:00 has started.

            Fix being worked on now.

            A minor glitch I’ve spotted with my Growatt system is that it retains the last charge instruction received. This means that it will repeat that last instruction at the same time every day, if nothing else has been received. A few nights ago my last charging slot was 03:00-03:30; the next night my first slot didn’t start until 04:00, but I had an unexpected 03:00-03:30 charge.
            Is it possible to ‘clear’ the settings after each charging period has ended to avoid this?
            Or possibly just send a 00:00-00:00 charge instruction at 22:59 each day?

              Giles Good shout yeah, should be sufficient to just set to disabled with nominal times.

              We’ll get a fix out.