• General

  • Intelligent Octopus Go - limited beta

Hello, @admin my Growatt battery failed to charge over night. I have checked the logs and there’s no history for last night.

Is there a way to check to see why?

Many thanks

    Ardvarky What is your WattID please?

    Odd - we can't find any entry in the logs for this. Schedules weren't paused I take it?

        admin Not that I'm aware off.
        I set up the Planned Intelligent charge slots to charge to 100% a while back and it's been working like a dream until last night.

        Below is my config:

        Many thanks

            Ardvarky Looks good. We've added some specific additional IOG logging and deployed that to for the IOG functions so we can diagnose and understand what's happened and fix if it happens again.

                admin
                Ok thanks!

                Fingers crossed it's goes back to working overnight and was just a glip.

                  Have a minor niggle with WW ending smart charging sessions.
                  My Octopus charging session was scheduled to end at 07:00 this morning and WW picked up all the various changes through the night without issue...

                  My daughter unplugged her car at 06:49 this morning (before the scheduled end time and whilst still charging) and WW almost immediately ended the session, reverting back to GE battery powering the house, rather than waiting until the 5min slot before 07:00 to swap things back.

                  Now, it's only 10mins in this instance, but I suspect if she'd unplugged at 06:31 something similar may have happened, meaning I'd have had half an hour of battery draw when it could have still been grid draw at 7p/kWh.

                  Could you have a look please @admin as WW appears to be picking up the wrong end signal in this scenario? TIA

                  primary-hotel

                    MrMessy Yeah, I think you raised this before, so this is all about finishing as close to the 00/30 min on the hour mark, correct?

                    We'll get this sorted.

                        admin yeah, that's pretty much it.
                        Whatever 1/2hr segment you're currently in, even by 1 minute, the cheap rate will run to the end of that, assuming you're outside of the core o/nite hrs.
                        eg 06:45 -> 07:00,
                        07:01 -> 07:30

                            MrMessy That's deployed in a server fix now. Front end version number won't reflect this (yet).

                            If there's no Octo mapped slots and we have an active IOG charge running, and not in default IOG window, we only disrupt the schedule at 28/29/58/59 min marks.

                                Just a very minor thing - and everything seems to working great, but for the last few nights the IOG charging schedule appears twice (see screenshot). Any ideas why please? neat-permission

                                  J1m Yeah we know why, we're looking further back for IOG slots as they sometimes get issued with start times up to 5 mins ago. But this is a bug at our end and we'll fix this.

                                    5 days later

                                    admin unfortunately, this is still not working correctly.
                                    I would have expected WW to set the end time to 07:00 in this scenario, rather than 06:37.......

                                    Could you have a look please?

                                    primary-hotel

                                        MrMessy It’s working for the scenario where you unplug the car, but fair point, for general IOG end times this needs to be in place too.

                                            admin so you're saying that if I'd unplugged the EV between 06:30 and 06:37 (before Octopus had ended the schedule), WW would extend the charge slot to 07:00 but, because the EV was still plugged in at 06:37, the charge slot was not extended?

                                                Thank you for enabling this function for me. All good so far - lots of extra charging slots for my home battery. I will check my bill at month-end to see if they were charged at the 7p rate! One query - I notice that, at the start of the process, an instruction is sent to set my reserve at 4% overriding my setting of 9 or 10%. Is this an essential part of the process? I normally like to keep a small reserve to ensure some systems keep running in the event of a power cut. Thanks again.